Search Suggestions
Categories
Products
View All Results
Sizes:
20L (Drum)
£85.50
Checking Stock
Add To Basket
Making sure that you use the right oil, lubricant, grease or product for your commercial / industrial application is especially important when dealing with expensive machinery.
If you are unsure if this product is right for your needs or have any other questions please feel free to get in touch or use our Recommendation form:
Industrial Help / Recommendation FormRENOLINE B HVI PLUS are premium EP/AW hydraulic fluids and lubricating oils formulated on hydrotreated base oils (Group II).
These products have outstanding low pourpoint and excellent low deposit tendency (low varnish fluid) as well as fantastic air release properties, low air in the fluid and rapid dynamic air separation. Zinc containing HVLP hydraulic and general lubricating oils according to DIN 51524-3.
RENOLIN B HVI PLUS RANGE are formulated using age resistant mineral oils and additives. They provide excellent corrosion protection for steel and iron materials, developed with excellent wear protection properties that enable them to work at high loads, high temperatures and in difficult environmental conditions.
The Renolin B 15 HVI Plus is a high quality product used as hydraulic oil and as lubricating oil for various mobile and stationary hydraulic equipment where demulsifying hydraulic oil (good water separation), type HVLP/HV is mandatory.
Especially recommended for applications where a low start-up viscosity at low temperatures and higher viscosity at higher temperatures is required.
RENOLIN | B 15 HVI PLUS | ||
Characteristics | Unit | Test Method | |
Kinematic viscosity at -20ºC at 0ºC at 40ºC at 100ºC | mm2/s mm2/s mm2/s mm2/s | 373 90 15 3.8 | DIN EN ISO 3104 |
Viscosity Index | - | 148 | DIN ISO 2909 |
Density at 15ºC | kg/m3 | 844 | DIN 51 757 |
Flash point in open cup according to Cleveland | ºC | 190 | DIN ISO 2592 |
Pour point | ºC | -57 | DIN ISO 3016 |
Neutralisation Number | mg KOH/g | 0.5 | DIN 51 558-2 |
Mechanical Testing in the FZG gear test rig, FZG A/8, 3/90 | failure load stage | 11 | DIN ISO 14635-1 |
Brugger test - wear protection | N/mm2 | 30 | DIN 51 347-2 |
VKA shear stability, four ball test: relative shear loss (viscosity reduction, V40 and V100) after 20h | % | <5 | DIN 51 350-6 |
Your question and our response may by made public to help others.
Free Shipping Over £50.00!
UK mainland, standard shipping*
No Leak Guarantee
We replace any shipping damages
Price Beater
We never like to be beaten on price